SMF Flanged Ball Bearings
Printable Page
Email This Page
Save To Favorites
|
Stainless Steel Sealed Flanged Deep Groove Ball Bearings: Manufactured in stainless steel to the same principal sizes as standard chrome steel bearings with rubber seals. These bearings have an additional flange to allow fitting into a housings flush against the shoulder of the flange. They are often used on steel tracks as guides and supports. The seals serve to offer protection to prevent ingress of debris, moisture and dust whilst retaining the grease within the bearing
Benefits: Cost effective replacement bearing, Flanged design, Higher corrosion resistance
>>
<<
| Select | Download | Inquiry | Bearing No. | ID(mm) | OD(mm) | Thickness(mm) | Rating load | Limit Speed(1000r/m) | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| open | ZZ/2RS | Cr | Cor | Grease lubricated | oil lubricated | ||||||
 |
SMF52 | 2 | 5 | 2 | 2.5 | 169 | 50 | 94 | 106 | ||
|
SMF62 | 2 | 6 | 2.5 | 2.5 | 333 | 100 | 83 | 93 | ||
|
SMF72 | 3 | 7 | 2.5 | 3 | 382 | 135 | 73 | 83 | ||
|
SMF63 | 2.5 | 6 | 2 | 2.5 | 209 | 74 | 71 | 80 | ||
|
SMF83 | 3 | 8 | 2.5 | 3 | 395 | 141 | 60 | 67 | ||
|
SMF93 | 3 | 9 | 2.5 | 4 | 571 | 189 | 56 | 67 | ||
|
SMF74 | 3 | 7 | 2 | 2.5 | 255 | 108 | 60 | 57 | ||
|
SMF84 | 4 | 8 | 2 | 3 | 395 | 141 | 56 | 67 | ||
|
SMF104 | 4 | 10 | 3 | 4 | 711 | 272 | 48 | 56 | ||
|
SMF85 | 4 | 8 | 2 | 2.5 | 218 | 90 | 53 | 63 | ||
|
SMF95 | 5 | 9 | 2.5 | 3 | 431 | 169 | 50 | 60 | ||
|
SMF105 | 5 | 10 | 3 | 4 | 431 | 169 | 50 | 60 | ||
|
SMF115 | 5 | 11 | 3 | 4 | 716 | 282 | 45 | 53 | ||
|
SMF106 | 6 | 10 | 2.5 | 3 | 496 | 218 | 45 | 53 | ||
|
SMF126 | 6 | 12 | 3 | 4 | 716 | 295 | 43 | 50 | ||
|
SMF117 | 7 | 11 | 2.5 | 3 | 455 | 202 | 43 | 50 | ||
|
SMF137 | 7 | 13 | 3 | 4 | 541 | 276 | 40 | 48 | ||
|
SMF128 | 8 | 12 | 2.5 | 3.5 | 543 | 274 | 40 | 48 | ||
|
SMF168 | 0.25 | 0.375 | 0.125 | |||||||
|
SMF148 | 8 | 14 | 3.5 | 4 | 817 | 386 | 38 | 45 | ||
>>
<<